San Antonio Concrete Cost Calculator
Get instant localized labor, material, & concrete volume estimates for San Antonio, TX & Bexar County.
- Total Surface Area 0 sq ft
- Concrete Volume Required 0 cu. yd
- Equivalent 80lb Bags 0 bags
- Estimated Rebar (#4 / 18″ grid) 0 linear ft
- Gravel Sub-base (4″ depth) 0 tons
- Estimated Labor Cost $0
- Estimated Material Cost $0
San Antonio Concrete Cost Calculator: Complete 2026 Price Guide
Planning a concrete project in San Antonio, TX or surrounding Bexar County? Estimating exact job costs can be tricky due to regional variations in ready-mix delivery rates, local labor markets, and site preparation needs. Using our free San Antonio concrete cost calculator, you can quickly estimate total project costs, exact concrete volume in cubic yards, 80lb bag counts, rebar requirements, and crushed gravel sub-base tonnage.
Average Concrete Prices in San Antonio, TX (Per Square Foot)
On average, concrete installation in San Antonio costs between $8.00 and $12.00 per square foot for standard residential applications like patios, walkways, and driveways. This turnkey rate includes local labor, excavation, gravel base prep, forms, concrete materials, and finishing.
- Standard Broom Finish Patio: $8.00 – $12.00 / sq ft (Typical 20×20 Slab Cost: $3,200 – $4,800)
- Smooth Trowel Garage Slab: $9.00 – $13.00 / sq ft (Typical 20×20 Slab Cost: $3,600 – $5,200)
- Stamped & Decorative Concrete: $13.00 – $22.00 / sq ft (Typical 20×20 Slab Cost: $5,200 – $8,800)
- Stained & Sealed Concrete: $10.00 – $15.00 / sq ft (Typical 20×20 Slab Cost: $4,000 – $6,000)
How to Calculate Concrete Volume & Material Costs
Calculating exact materials ensures you don’t overpay for ready-mix delivery or run short during a pour. Follow these standard steps or let our interactive San Antonio concrete cost calculator handle the math automatically:
- Calculate Square Footage: Multiply length (ft) by width (ft). A 20ft by 15ft patio equals 300 sq ft.
- Convert Thickness to Feet: Divide slab thickness in inches by 12. A 4-inch slab is 4 / 12 = 0.333 ft.
- Calculate Volume in Cubic Feet: Multiply area by thickness in feet. 300 sq ft x 0.333 ft = 100 cu ft.
- Convert to Cubic Yards: Divide cubic feet by 27. 100 / 27 = 3.70 cubic yards.
- Add Waste Factor: Always add 10% extra volume to cover spillage, excavation inconsistencies, or ground settling.
San Antonio Ready-Mix Concrete Delivery vs. Bagged Concrete
When ordering concrete in Bexar County, choosing between ready-mix delivery trucks and pre-mixed bags depends on project size:
- Ready-Mix Delivery: Ready-mix concrete in San Antonio averages around $155 per cubic yard. Most suppliers require a minimum order of 2 to 3 yards, making truck delivery the most cost-effective choice for jobs over 50 sq ft.
- Bagged Concrete (DIY): One cubic yard requires approximately 45 bags (80lb each). At roughly $6.50 per bag, small repairs or fence post settings under 1 cubic yard are best handled with bagged mix.
Frequently Asked Questions (San Antonio Concrete)
Q: How thick should a concrete driveway be in San Antonio? A: Standard passenger vehicle driveways require a minimum 5-inch concrete slab thickness over a 4-inch compacted gravel sub-base with #4 rebar reinforcement. Heavy pickup trucks or RV parking pads should be poured at 6 inches.
Q: Do I need a permit for a concrete patio in San Antonio? A: Within San Antonio city limits, flatwork concrete projects under certain square footage thresholds may not require a building permit unless work impacts drainage easements, setbacks, or structural foundations. Check with the City of San Antonio Development Services Department (DSD) or your local HOA prior to excavation.
Q: How does San Antonio clay soil affect concrete cost? A: San Antonio and South Texas feature expansive clay soils (Blackland Prairie clays) that expand and contract significantly during dry and wet cycles. To prevent cracking, contractors recommend a 4-inch crushed limestone/gravel sub-base (+$1.50 – $2.50/sq ft) and proper rebar placement.
- Ready Mix Concrete Supplier Texas | Volume & Cost Guide - November 1, 2026
- How do you calculate m3 of concrete? - July 30, 2026