Concrete Cost Calculator Kilgore Tx – Concrete Work Estimate

Concrete Cost Calculator Kilgore, TX

Estimate concrete yardage, bag counts, labor, and local project costs instantly.

Avg. Kilgore, TX: $135 – $160 / yd³
Avg. Kilgore, TX: $3.50 – $6.00 / sq.ft.

Project Estimate Summary

📍 Kilgore, TX
Estimated Total Cost $0.00
Area: 0 sq ft
Required Concrete: 0.00 Cubic Yards
Pre-mixed Bags (80 lb): 0 Bags
Concrete Materials Cost: $0.00
Estimated Labor Cost: $0.00

How Much Does Concrete Cost in Kilgore, TX? (2026 Cost Guide)

On average, homeowners and contractors in Kilgore, Texas spend between $135 and $160 per cubic yard for ready-mix concrete delivery. When factoring in labor, site preparation, grading, and rebar reinforcement, the total cost to pour a concrete slab in Kilgore typically ranges from $6.00 to $10.50 per square foot.

Local Concrete Pricing Breakdown in Kilgore & Gregg/Rusk County

Concrete pricing in East Texas depends on strength (PSI rating), volume, distance from local batch plant suppliers, and project complexity. Here is a breakdown of average local rates:

  • Standard 3,000 PSI Ready-Mix Concrete: $135 – $148 per cubic yard
  • Heavy-Duty 4,000 PSI Ready-Mix Concrete: $150 – $165 per cubic yard
  • Short-Load Delivery Fee (Under 5–7 Yards): $75 – $120 flat fee
  • 80 lb Pre-Mixed Concrete Bags: $5.20 – $6.50 per bag
  • Sub-base Prep & Excavation: $1.50 – $3.00 per sq. ft.
  • Finishing & Labor: $3.50 – $6.00 per sq. ft.

How to Estimate Your Concrete Project Step-by-Step

Calculating your required concrete yardage prevents under-ordering or paying high short-load fees:

  1. Measure the Surface Area: Multiply your project length by its width to find total square footage (Length x Width).
  2. Convert Thickness to Feet: Divide your slab thickness in inches by 12 (for example, a standard 4-inch slab is 4 / 12 = 0.333 feet).
  3. Calculate Volume in Cubic Feet: Multiply square footage by thickness in feet (Area x Thickness).
  4. Convert to Cubic Yards: Divide total cubic feet by 27 (Cubic Feet / 27 = Cubic Yards).
  5. Add a Waste Factor: Add 10% extra volume to cover spillage, excavation variance, and formwork movement.

Average Concrete Costs by Project Type in Kilgore, TX

  1. Concrete Patio / Slab (4-Inch Thickness) A standard 12×12 ft (144 sq. ft.) backyard patio requires roughly 2.0 cubic yards of concrete with waste included. Material and labor costs in Kilgore usually range from $850 to $1,400.
  2. Concrete Driveway Installation Residential driveways in Gregg County are generally poured at a 4-inch or 5-inch depth with rebar grid reinforcement to handle truck traffic. A 20×20 ft (400 sq. ft.) driveway replacement costs between $2,600 and $4,200.
  3. Foundation & Shed Slabs Engineered foundation slabs require thickened edges (monolithic footings) and vapor barriers. Expect costs between $7.50 and $12.00 per square foot including formwork and steel placement.

Key Factors Affecting Concrete Prices in East Texas

  • Soil Conditions & Clay Content: Kilgore soil often contains high clay levels, requiring a proper crushed stone sub-base (gravel or crusher run) to prevent slab cracking during wet-dry cycles.
  • Reinforcement Material: Installing #3 or #4 rebar grid or wire mesh adds approximately $0.45 to $0.85 per square foot to your overall material budget.
  • Finish & Coloring: Basic broom finish is standard. Stenciled, stamped, or stained decorative concrete increases total project costs to $12.00 – $18.00 per sq. ft.

Frequently Asked Questions (Kilgore, TX Concrete)

How many 80 lb bags of concrete make a cubic yard? It takes 45 bags of 80 lb pre-mixed concrete to equal 1 cubic yard (27 cu. ft.). Each 80 lb bag yields approximately 0.6 cubic feet of mixed concrete.

What is a short-load fee for concrete delivery? Most local ready-mix concrete companies in Kilgore and Longview require a minimum order of 5 to 6 cubic yards. If you order less than the minimum, a short-load fee of $75 to $120 is added to your delivery invoice.

How thick should a residential concrete driveway be in Kilgore, TX? Standard passenger vehicle driveways require 4 inches of 3,000 PSI concrete. If heavy equipment, trailers, or RVs will park on the driveway, a 5-inch or 6-inch slab with rebar reinforcement is strongly recommended.

Play sounddiy home repair and improvement guide